USB1_E=LEVEL_DETECT, TIM6_E=LEVEL_DETECT, WWDT_E=LEVEL_DETECT, QEI_E=LEVEL_DETECT, SDMMC_E=LEVEL_DETECT, ATIMER_E=LEVEL_DETECT, USB0_E=LEVEL_DETECT, TIM14_E=LEVEL_DETECT, RESET_E=LEVEL_DETECT, WAKEUP1_E=LEVEL_DETECT, WAKEUP2_E=LEVEL_DETECT, BODRESET_E=LEVEL_DETECT, WAKEUP0_E=LEVEL_DETECT, ETH_E=LEVEL_DETECT, RTC_E=LEVEL_DETECT, CAN_E=LEVEL_DETECT, BOD_E=LEVEL_DETECT, DPDRESET_E=LEVEL_DETECT, TIM2_E=LEVEL_DETECT, WAKEUP3_E=LEVEL_DETECT
Edge configuration
| WAKEUP0_E | Edge detect mode for WAKEUP0 event. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_WAKEU): Edge detect of WAKEUP0 pin. Detect falling edge if bit 0 in the HILO register is 0. Detect rising edge if bit 0 in the HILO register is 1. |
| WAKEUP1_E | Edge/level detect mode for WAKEUP1 event. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_WAKEU): Edge detect of WAKEUP1 pin. Detect falling edge if bit 1 in the HILO register is 0. Detect rising edge if bit 1 in the HILO register is 1. |
| WAKEUP2_E | Edge/level detect mode for WAKEUP2 event. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_WAKEU): Edge detect of WAKEUP2 pin. Detect falling edge if bit 2 in the HILO register is 0. Detect rising edge if bit 2 in the HILO register is 1. |
| WAKEUP3_E | Edge/level detect mode for WAKEUP3 event. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_WAKEU): Edge detect of WAKEUP3 pin. Detect falling edge if bit 30 in the HILO register is 0. Detect rising edge if bit 3 in the HILO register is 1. |
| ATIMER_E | Edge/level detect mode for alarm timer event. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_THE_A): Edge detect of the alarm timer interrupt. Detect falling edge if bit 4 in the HILO register is 0. Detect rising edge if bit 4 in the HILO register is 1. |
| RTC_E | Edge/level detect mode for RTC event. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_THE_R): Edge detect of the RTC interrupt. Detect falling edge if bit 5 in the HILO register is 0. Detect rising edge if bit 5 in the HILO register is 1. |
| BOD_E | Edge/level detect mode for BOD event. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_THE_B): Edge detect of the BOD interrupt. Detect falling edge if bit 6 in the HILO register is 0. Detect rising edge if bit 6 in the HILO register is 1. |
| WWDT_E | Edge/level detect mode for WWDTD event. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_THE_W): Edge detect of the WWDT interrupt. Detect falling edge if bit 7 in the HILO register is 0. Detect rising edge if bit 7 in the HILO register is 1. |
| ETH_E | Edge/level detect mode for ethernet event. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_THE_E): Edge detect of the Ethernet interrupt. Detect falling edge if bit 8 in the HILO register is 0. Detect rising edge if bit 8 in the HILO register is 1. |
| USB0_E | Edge/level detect mode for USB0 event. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_THE_U): Edge detect of the USB0 event. Detect falling edge if bit 9 in the HILO register is 0. Detect rising edge if bit 9 in the HILO register is 1. |
| USB1_E | Edge/level detect mode for USB1 event. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_THE_U): Edge detect of the USB1 interrupt. Detect falling edge if bit 10 in the HILO register is 0. Detect rising edge if bit 10 in the HILO register is 1. |
| SDMMC_E | Edge/level detect mode for SD/MMC event.The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_THE_S): Edge detect of the SD/MMC interrupt. Detect falling edge if bit 10 in the HILO register is 0. Detect rising edge if bit 10 in the HILO register is 1. |
| CAN_E | Edge/level detect mode for C_CAN event. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_THE_C): Edge detect of the combined C_CAN interrupt. Detect falling edge if bit 12 in the HILO register is 0. Detect rising edge if bit 12 in the HILO register is 1. |
| TIM2_E | Edge/level detect mode for combined timer output 2 event. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_GIMA): Edge detect of GIMA output 25. Detect falling edge if bit 13 in the HILO register is 0. Detect rising edge if bit 13 in the HILO register is 1. |
| TIM6_E | Edge/level detect mode for combined timer output 6 event. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_GIMA): Edge detect of GIMA output 26. Detect falling edge if bit 14 in the HILO register is 0. Detect rising edge if bit 14 in the HILO register is 1. |
| QEI_E | Edge/level detect mode for QEI interrupt signal. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_QEI_I): Edge detect of QEI interrupt. Detect falling edge if bit 15 in the HILO register is 0. Detect rising edge if bit 15 in the HILO register is 1. |
| TIM14_E | Edge/level detect mode for combined timer output 14 event. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_GIMA): Edge detect of GIMA output 27. Detect falling edge if bit 16 in the HILO register is 0. Detect rising edge if bit 16 in the HILO register is 1. |
| RESERVED | Reserved. |
| RESET_E | Edge/level detect mode for Reset. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_THE_R): Edge detect of the reset signal. Detect falling edge if bit 19 in the HILO register is 0. Detect rising edge if bit 19 in the HILO register is 1. |
| BODRESET_E | Edge detect of the BOD reset signal. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_THE_R): Edge detect of the reset signal. Detect falling edge if bit 20 in the HILO register is 0. Detect rising edge if bit 19 in the HILO register is 1. |
| DPDRESET_E | Edge detect of the deep power-down reset signal. The corresponding bit in the EDGE register must be 0. 0 (LEVEL_DETECT): Level detect. 1 (EDGE_DETECT_OF_THE_R): Edge detect of the reset signal. Detect falling edge if bit 21 in the HILO register is 0. Detect rising edge if bit 21 in the HILO register is 1. |
| RESERVED | Reserved. |